HARD-HV-6500MAH-140C

The DXF Golden Upgraded Series 4S HV 15.2V 6500mAh 140C Graphene Hardcase LiPo Battery is precision-engineered for competitive RC racers, extreme bashers, and high-speed enthusiasts. Featuring advanced High Voltage (LiHV) graphene-enhanced cell technology, this pack delivers a higher nominal voltage of 15.2V (3.8V per cell) and an explosive 140C burst discharge capability. Housed inside a rugged, impact-resistant protective hardcase shell, it delivers relentless power, sustained top-end speed, and ultra-low internal resistance under the most punishing off-road conditions.

Key Features:

• High Voltage (LiHV) 15.2V Output: Provides higher starting voltage and superior energy density compared to standard 14.8V LiPo packs, delivering punchier acceleration and higher top speeds.
• Extreme 140C Discharge Output: Engineered to provide instantaneous, explosive throttle bursts without voltage drop during high-demand speed runs and aggressive bashing.
• Rugged Protective Hardcase: Built with high-impact composite polymer casing to shield internal cells against harsh roost, hard landings, and track rollover impacts.
• Graphene Cell Architecture: Premium Grade-A graphene-infused plates reduce heat buildup, ensure ultra-low internal resistance (IR), and extend cycle life past 500 charges.
• Versatile Connector Options: Pre-soldered with heavy-duty heat-resistant wiring and factory connector choices including EC5, Deans (T), TRX, XT60, XT90, XT150, and QS8.

Specifications:

• Battery Chemistry: High Voltage Graphene Lithium Polymer (LiHV)
• Configuration: 4S1P
• Nominal Voltage: 15.2V (3.8V per cell)
• Capacity: 6500mAh (98.8Wh)
• Discharge Rating: 140C
• Max Charge Voltage: 17.4V (4.35V per cell in LiHV mode; 4.20V in standard mode)
• Discharge Cut-off Voltage: 13.6V (3.4V per cell)
• Dimensions: Approx. 138 × 48 × 36 mm
• Weight: Approx. 479g (16.89 oz)
• Case Type: High-Impact Protective Hardcase Shell
• Balance Connector: Standard JST-XH
• Discharge Connectors: EC5 / Deans (T) / TRX / XT60 / XT90 / XT150 / QS8

Package Options:

• 1 PCS Pack: Single matched 4S HV 6500mAh 140C hardcase pack with accessory strap and manual.
• 2 PCS Value Bundle: Dual matched battery set ideal for twin-pack 8S systems or extended back-to-back track sessions.
• Includes Battery Straps, Instruction Manual & Sturdy DXF Packaging Box

Recommended Applications:

• 1/8 scale RC buggies, truggies, short course trucks, and monster trucks (Arrma, Traxxas, Losi, Team Associated).
• 1/10 scale high-power brushless RC bashers and high-speed drag racing vehicles.
• High-speed RC racing boats, hydroplanes, and heavy-duty 4S/8S multi-rotor platforms.

Usage & Safety Guidelines:

• Charge exclusively with a certified microprocessor balance charger set to LiHV (or LiPo) balance mode; do not exceed 4.35V per cell.
• Always place batteries inside a fireproof LiPo safe bag or protective metal container during charging on a fireproof surface.
• Charge strictly at 1C (6.5A) or lower (never exceed 1C charge rate).
• Never over-discharge below 3.4V per cell (13.6V total), and never leave charging batteries unattended.
• Store batteries at 15.2V (3.80V per cell) storage voltage in a cool, dry, well-ventilated space when not in use.

180-Day Manufacturer Warranty:

DXF provides a dedicated 180-day limited warranty covering manufacturing defects, material flaws, and assembly workmanship. Please inspect and verify individual cell balance voltages upon arrival prior to cycling.