DXF 850mAh 60C LiHV FPV Battery Series Multi-Application Compatibility

850mAh-FPV-60C-801761

6 products

🌍 Global Fast Shipping Notice (Dispatched from China Warehouse)

Orders from this collection are carefully packed and dispatched directly from the DXF factory warehouse in China, utilizing dedicated battery logistics lines for fast, secure door-to-door worldwide delivery.

👉 View Worldwide Shipping Rates & Estimated Delivery Timelines

High-Voltage Micro Power for FPV Drones & Multi-Platform RC

The DXF 850mAh 60C LiHV Battery Series delivers higher operating voltage, quick burst throttle recovery, and dependable endurance across 2-inch to 3.5-inch micro FPV quads, toothpick drones, cinewhoops, scale RC vehicles, and micro boats. Built with high-voltage lithium formulation (3.8V nominal / 4.35V peak per cell), this series maintains stronger motor RPM and reduces voltage sag under intense throttle demands.

Available across 1S (3.8V) through 6S (22.8V) configurations in value-packed 4 PCS and 6 PCS multi-packs, with 7 factory-installed connector options (PH2.0, JST, XT30, SM, XT60, EC5, XT90) tailored for direct connection to your power harness without adapter clutter.

Key Advantages & Performance Highlights

High-Voltage LiHV Chemistry (4.35V/Cell): Higher initial operating voltage delivers increased motor thrust and extended flight times compared to standard packs.
Dependable 60C Discharge Output: Engineered to supply instant current spikes without bogging down during demanding freestyle maneuvers or full-throttle runs.
Slender & Compact Profile: 801761 cell engineering achieves the optimal power-to-weight ratio crucial for agile micro and mid-size builds.
7 Factory Connector Choices: Choose PH2.0, JST, XT30, SM, XT60, EC5, or XT90 for direct connection to your power harness.
Cost-Effective Bundles: Available in 4 PCS and 6 PCS packages to maintain continuous flying or driving rotations without waiting on recharges.
High Cycle Life: Premium high-purity electrolyte technology reduces internal resistance and preserves capacity retention over extended use.

Series Specifications & Configuration Matrix

Model / Config	Nominal Voltage	Capacity	Discharge Rate	Dimensions (L×W×H)	Approx. Weight
1S HV (1S1P)	3.8V (Max 4.35V)	850mAh	60C	66 × 18 × 8 mm	18g ± 2g
2S HV (2S1P)	7.6V (Max 8.70V)	850mAh	60C	70 × 18 × 16 mm	35g ± 2g
3S HV (3S1P)	11.4V (Max 13.05V)	850mAh	60C	71 × 18 × 24 mm	52g ± 3g
4S HV (4S1P)	15.2V (Max 17.40V)	850mAh	60C	73 × 18 × 32 mm	73g ± 3g
5S HV (5S1P)	19.0V (Max 21.75V)	850mAh	60C	73 × 18 × 40 mm	91g ± 4g
6S HV (6S1P)	22.8V (Max 26.10V)	850mAh	60C	73 × 18 × 47 mm	103g ± 5g

Target Applications & Broad Compatibility

Optimized for compact to intermediate RC aircraft and surface models, including:

1S (3.8V) & 2S (7.6V): 75mm to 85mm micro drones, park flyers, 1/18 scale RC cars, and lightweight gliders.
3S (11.4V) & 4S (15.2V): 2-inch to 3.5-inch high-performance cinewhoops, sub-250g micro racing quads, 3D aerobatic planes.
5S (19.0V) & 6S (22.8V): Specialized high-KV micro racing builds, high-speed EDF jets, and competitive 6S micro platforms.

Available connectors: PH2.0, JST, XT30, SM, XT60, EC5, and XT90. Choose the plug configuration suited for your electronic speed controller.

Usage & Safety Guidelines

LiHV Balance Charging: Always use a smart balance charger set specifically to LiHV mode (4.35V per cell cut-off). Never charge above 4.35V/cell.
Recommended Charge Rate: Charge at 1C (0.85A) for optimal cell health and service life. Never leave charging batteries unattended.
Discharge Protection: Never discharge cells below 3.3V under load to avoid premature degradation and internal cell damage.
Storage Maintenance: For storage exceeding 48 hours, balance charge/discharge to storage voltage (3.85V per cell) and place in a fireproof LiPo safety bag.
Safe Environment: Charge exclusively on non-flammable surfaces in a well-ventilated area away from combustible materials.

Why Pilots Choose DXF POWER

Since 2000, DXF has specialized in precision-engineered lithium power solutions for competitive RC pilots and micro drone enthusiasts worldwide. Through grade-A automated cell manufacturing, stringent quality inspections, and direct factory distribution, DXF delivers outstanding reliability and exceptional value. Every pack is backed by our dedicated 180-day manufacturer warranty and responsive technical support.