(EU)2 paires DXF Hobby XT90 prise vers EC5 Style mâle femelle connecteur sans fil adaptateur pour RC FPV batterie charge ESC
DXF is one battery brand of Shenzhen SKT Technology Co., LtdCompany founded in 2016, is a leading manufacturer of RC LiPo Battery based on Shenzhen China. DXF Batteries offer an excellent value by providing factory direct pricing and quality that meets or exceeds that of other major battery manufacturers. All of DXF batteries comply with RoHS and CE quality testing standards.DXF only use Grade A cell. DXF which is the Fans hobbyking town.
- Used to convert battery with XT90 to EC5 on electronic speed control ESC or charger FPV multirotor rc car.
- 2PCS female XT90 to male EC5 style plug connector and 2PCS male XT90 to female EC5 style plug connector.
- Plug and play,wireless battery adapter,easy to use.
- Solid and secure connection ,light weight and compact with excellent performance.
- Pack of 2Pairs.No need to solder,save time.
Item: XT90 Plug to EC5 Style Plug Adapter.
Connector Type: XT90 Plug;EC5 Style Plug
Used for convert battery with XT90 to EC5 Plug on electronic speed controller or charger.
Solid and secure connection,light weighted ,reduce weight for RC FPV multirotor Car.
No Wires Design,no need to solder.It can save more space,portable and easy to use.
Low resistance to high current capacity, which is perfect for high power application.
Save time soldering by using these connectors.
Plug and play, easy to use.
2 x XT90 Plug Male to EC5 Female connector.
2 x XT90 Plug Female to EC5 Male connector.
1. Before using it, please full charge it with specific lipo balance charger;
2. Charge lipo battery no more than 4.20V per cell. As for battery pack in series, Please choose balance charging mode or charge each cell respectively;
3. Charging temperature must range in 15-35 Celsius, reverse charging is prohibited;
4. The voltage difference between any two cells should be in 0.03V, or charge is advised to balance the voltages beforeusage;
5. Please make sure the cut-off voltage is not lower than 3.4V, we highly recommend not lower than 3.6V;
6. Never discharge battery with current over the designed maximum continuous discharging current. After over current discharge, the performance will be deteriorated and cycle life will be shortened, causing overheating and even welling ,breakage, internal short-circuited etc;
7. If the surface temperature exceeds 65 Celsius while functioning, the battery should be suspended using until it cool down to ambient temperature naturally. Higher temperature may result int battery swelling and performance;
8. Do regularly charge discharge for maintenance(about 1-3 times every 3 months),battery must stored at about 3.85v/cell;
9. Do store battery at a place with low-humidity and free from corrosive gas within the temperature ranged from -20 Celsius to +40 Celsius
10. Under any circumstances dis-assembly of battery is prohibited.
DXF LiPo cells are produced in fully automated machines that control the quality of production at every step.This is our new Lipo for stock racing. It has supreme power. This is the best power you can get for serious stock racing,It features high power 5mm sockets for minimized resistance and a new, black hard case with revised stylish Stickers.Of course, this Lipo also meets the requirements of any modified racing. You will have power as evenly as never before.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.