DXF 4S Lipo Battery 14.8V 10000mAh 100C 200C XT90 for RC 1/8 1/10 Car Truck Tank Models XXMAX 8S Arrama
DXF is one battery brand of Shenzhen SKT Technology Co., LtdCompany founded in 2016, is a leading manufacturer of RC LiPo Battery based on Shenzhen China. DXF Batteries offer an excellent value by providing factory direct pricing and quality that meets or exceeds that of other major battery manufacturers. All of DXF batteries comply with RoHS and CE quality testing standards.DXF only use Grade A cell. DXF which is the Fans hobbyking town.
- Stable automatic stacking technology enables single-cell capacities .
- Higher capacity during heavy discharge. More than 90% at 100% C rate.
- Fast charge capable, up to 5C on some batteries.
- Longer Cycle Life, almost double that of standard lipoly technology.
- Friendly after-sales support and after-sales guarantee.
4S1P14.8V 10000mah 100C lipo SoftCase size: 162*48*45mm 10AWG weight 740g.
1PCS 14.8V 10000MAH 100C XT90 PLUG OR
2PCS 14.8V 10000MAH 100C XT90 PLUG OR
3PCS 14.8V 10000MAH 100C XT90 PLUG OR
4PCS 14.8V 10000MAH 100C XT90 PLUG OR
5PCS 14.8V 10000MAH 100C XT90 PLUG OR
6PCS 14.8V 10000MAH 100C XT90 PLUG OR
1. Before using it, please full charge it with specific lipo balance charger;
2. Charge lipo battery no more than 4.20V per cell. As for battery pack in series, Please choose balance charging mode or charge each cell respectively;
3. Charging temperature must range in 15-35 Celsius, reverse charging is prohibited;
4. The voltage difference between any two cells should be in 0.03V, or charge is advised to balance the voltages beforeusage;
5. Please make sure the cut-off voltage is not lower than 3.4V, we highly recommend not lower than 3.6V;
6. Never discharge battery with current over the designed maximum continuous discharging current. After over current discharge, the performance will be deteriorated and cycle life will be shortened, causing overheating and even welling ,breakage, internal short-circuited etc;
7. If the surface temperature exceeds 65 Celsius while functioning, the battery should be suspended using until it cool down to ambient temperature naturally. Higher temperature may result int battery swelling and performance;
8. Do regularly charge discharge for maintenance(about 1-3 times every 3 months),battery must stored at about 3.85v/cell;
9. Do store battery at a place with low-humidity and free from corrosive gas within the temperature ranged from -20 Celsius to +40 Celsius
10. Under any circumstances dis-assembly of battery is prohibited.
NOTE: PLUG IS BASED YOUR SELECT.
DXF LiPo cells are produced in fully automated machines that control the quality of production at every step.This is our new Lipo for stock racing. It has supreme power. This is the best power you can get for serious stock racing,It features high power 5mm sockets for minimized resistance and a new, black hard case with revised stylish Stickers.Of course, this Lipo also meets the requirements of any modified racing. You will have power as evenly as never before.