5500mAh-HV-BULLET

The DXF 2S HV 7.6V 5500mAh 150C Hardcase LiPo Battery with 5mm Bullet Ports delivers high-voltage power and extended runtime for on-road RC touring cars and racing chassis. Engineered with advanced graphene chemistry and an optimized NGP Plus Shorty form factor (96 × 48 × 22.5 mm, approx. 195g), this race-ready battery provides 7.6V nominal power (up to 4.35V/cell max charge) for elevated top speed, explosive 150C throttle response, and minimal voltage sag throughout demanding racing heats.

Watch DXF Batteries in Action

Key Features

• 150C extreme discharge rate: Blistering acceleration, instantaneous throttle response, and robust current delivery for competitive heats
• 7.6V high-voltage (LiHV) platform: 3.80V nominal / 4.35V max charge per cell provides higher motor RPM and competitive punch compared to standard 7.4V packs
• 5500mAh extended capacity: High energy density in a compact footprint for longer run times and strong voltage sustain through full heats
• NGP Plus Shorty form factor: Precision dimensions (96 × 48 × 22.5 mm, approx. 195g) lower the vehicle center of gravity (CG) for agile cornering and balanced chassis handling
• Gold-plated 5mm bullet ports: Direct-plug female bullet sockets ensure minimal resistance and maximum electrical conductivity
• Graphene cell technology: Enhanced thermal dissipation, ultra-low internal resistance, and durable cycle longevity under demanding race schedules
• Included 5mm bullet charging harness: Complete with flexible silicone power leads and selected connector (XT60, EC5, TRX, Deans/T-Plug, XT90, XT150, or Q8S) plus JST-XH balance lead
• Grade-A matched cells: Rigorously factory matched for cell voltage balance, low IR, and consistent lap-after-lap power

Specifications, Per Battery

• Brand: DXF POWER
• Series: DXF Graphene Competition Series
• Capacity: 5500mAh
• Voltage: 7.6V nominal (High-Voltage 2S LiHV, 3.80V/cell nominal, 4.35V max charge per cell)
• Configuration: 2S1P
• Discharge Rate: 150C
• Form Factor: Impact-resistant hardcase with 5mm bullet terminals
• Dimensions: Approximately 96 × 48 × 22.5 mm
• Weight: Approximately 195g
• Terminal Ports: Dual 5mm gold bullet sockets + 2mm center balance socket
• Included Cable Harness: 5mm bullet connectors to chosen main plug (XT60, EC5, TRX, Deans/T-Plug, XT90, XT150, or Q8S) with JST-XH balance plug
• Applications: Spec-fit for 1/10 scale on-road RC touring cars, pan cars, drift cars, formula chassis, buggies, and lightweight racing builds

Package Includes

• DXF 2S HV 7.6V 5500mAh 150C hardcase LiPo battery, quantity chosen from 1–2 packs
• 5mm gold bullet to selected main connector charge/discharge wiring harness with balance lead
• User manual and safety guide

Choose Your Ideal Power Bundle

• 1 Pack – Start Strong: Single competition battery for race qualifiers, shakedown testing, or dedicated single-car setups
• 2 Pack – Double Your Runtime: Swap fresh packs instantly between qualifying heats and main events without track downtime

More packs mean longer operating sessions, fewer downtime interruptions, and dependable backup capacity.

180-Day Warranty & Customer Support

Every DXF battery is backed by a 180-day manufacturer warranty against defects in materials and workmanship. DXF customer support is readily available for guidance on connector compatibility, charging parameters, and battery maintenance.

Usage & Safety Guidelines

• Use a dedicated balance charger supporting high-voltage 2S LiHV (4.35V/cell) balance charging.
• Always balance charge inside a fire-resistant LiPo safety bag and never leave charging batteries unattended.
• Do not overcharge past 4.35V per cell or discharge below 3.2V per cell.
• Store batteries at 3.80V–3.85V per cell in a cool, dry, ventilated location away from direct sunlight.
• Inspect the hardcase, 5mm bullet harness, and terminals before every race session.
• Never puncture, drop, crush, short-circuit, or expose the pack to extreme temperatures or water.
• Verify vehicle battery tray dimensions, polarity markings, and ESC voltage compatibility before operation.

Why Choose DXF?

• Advanced graphene chemistry delivering exceptional current density and flat discharge curves
• High-voltage 7.6V platform providing competitive speed and power advantages
• Low-profile NGP Plus form factor providing optimal weight distribution and low CG
• Gold-plated bullet ports offering flexible, zero-adapter wiring to your electronics
• Strict quality inspection and rigorous factory testing
• Professional customer service and global warehouse logistics

Perfect For

Engineered for competitive 1/10 on-road RC touring car racers, club competitions, indoor carpet tracks, asphalt circuits, and custom RC builds requiring a high-discharge 2S HV 7.6V 150C hardcase shorty pack.

Dominate the track with DXF high-discharge power. Watch setups and performance tests on the DXF YouTube channel.