DXF 300mAh 60C LiHV Micro FPV Battery Series Multi-Application Compatibility

300mAh-FPV-60C-651158

2 製品

🌍 Global Fast Shipping Notice (Dispatched from China Warehouse)

Orders from this collection are carefully packed and dispatched directly from the DXF factory warehouse in China, utilizing dedicated battery logistics lines for fast, secure door-to-door worldwide delivery.

👉 View Worldwide Shipping Rates & Estimated Delivery Timelines

Ultra-Light High-Voltage Power for Tiny Whoops & Micro RC

The DXF 300mAh 60C LiHV Battery Series is engineered specifically for weight-sensitive micro flight platforms, including 65mm–75mm tiny whoops, indoor brushed and brushless racers, and ultra-lightweight micro aircraft. Featuring advanced high-voltage lithium formulation (3.8V nominal / 4.35V peak per cell), this series provides higher starting voltage, crisp throttle snap, and reduced voltage sag during high-demand acrobatic maneuvers.

Available in 1S (3.8V) and 2S (7.6V) configurations across convenient 4 PCS and 6 PCS multi-packs. Equipped with 7 optional factory-installed connectors (PH2.0, JST, XT30, SM, XT60, EC5, XT90) tailored for seamless connection to your flight controller or ESC.

Key Advantages & Performance Highlights

High-Voltage LiHV Architecture (4.35V/Cell): Higher cut-off charge threshold delivers increased motor RPM and prolonged flight endurance over standard 4.2V packs.
Punchy 60C Discharge Output: Engineered to supply instant current spikes without bogging down during demanding freestyle maneuvers or full-throttle bursts.
Featherweight 651158 Form Factor: Minimized gram-weight maintains agile handling, low wing loading, and maximum flight duration.
7 Factory Connector Selections: Choose PH2.0, JST, XT30, SM, XT60, EC5, or XT90 for direct connection to your power harness.
Value Multi-Pack Bundles: Available in 4 PCS and 6 PCS packages to maintain continuous flying rotations without waiting on recharges.
Low Internal Resistance: Premium automated stack construction minimizes thermal buildup and maximizes energy conversion efficiency.

Series Specifications & Configuration Matrix

Model / Config	Nominal Voltage	Capacity	Discharge Rate	Dimensions (L×W×H)	Approx. Weight
1S HV (1S1P)	3.8V (Max 4.35V)	300mAh	60C	51 × 11.5 × 6.7 mm	7.2g ± 0.5g
2S HV (2S1P)	7.6V (Max 8.70V)	300mAh	60C	52.5 × 12 × 13.8 mm	15g ± 1g

Target Applications & Broad Compatibility

Optimized for compact indoor and outdoor micro RC models, including:

1S (3.8V): 65mm tiny whoops (such as Mobula6, Meteor65), indoor micro helicopters, sub-micro indoor gliders.
2S (7.6V): 75mm high-power whoops (such as Mobula7 2S, Meteor75), micro toothpicks, 1/28 and 1/24 micro RC buggies.

Available connectors: PH2.0, JST, XT30, SM, XT60, EC5, and XT90. Select the matching connector for seamless plug-and-play operation.

Usage & Safety Guidelines

LiHV Balance Charging: Always use a dedicated LiHV balance charger set to 4.35V cut-off per cell. Never exceed 4.35V/cell.
Recommended Charge Current: Charge at 1C (0.30A) for optimal cell longevity. Never charge batteries unattended.
Discharge Threshold: Stop flying/driving before cell voltage drops below 3.3V under load to avoid permanent cell degradation.
Storage Protocol: Store cells at 3.85V per cell when not in use for more than 48 hours, placed inside a fireproof safety bag.
Safe Environment: Always charge on non-flammable surfaces in a clean, well-ventilated area away from combustible materials.

Why Pilots Choose DXF POWER

Since 2000, DXF has specialized in premium lithium battery engineering for competitive RC enthusiasts and drone pilots worldwide. With automated grade-A cell production, rigorous quality testing, and direct factory supply, DXF delivers rock-solid performance and exceptional value. Every pack is covered by our comprehensive 180-day manufacturer warranty and responsive technical support.