DXF 380mAh 60C LiHV Micro FPV Battery Series Multi-Application Compatibility

380mAh-FPV-60C-601168

3 products

🌍 Global Fast Shipping Notice (Dispatched from China Warehouse)

Orders from this collection are carefully packed and dispatched directly from the DXF factory warehouse in China, utilizing dedicated battery logistics lines for fast, secure door-to-door worldwide delivery.

👉 View Worldwide Shipping Rates & Estimated Delivery Timelines

Ultra-Light High-Voltage Power for Tiny Whoops & Micro RC

The DXF 380mAh 60C LiHV Battery Series is purpose-engineered for weight-critical micro flight platforms, including 65mm–85mm tiny whoop racers, micro indoor flyers, brushless toothpicks, and lightweight scale RC models. Utilizing high-voltage cell formulation (3.8V nominal / 4.35V peak per cell), these batteries provide higher starting voltage, crisp throttle snap, and reduced voltage sag during high-demand aerobatic maneuvers.

Available in 1S (3.8V), 2S (7.6V), and 3S (11.4V) configurations across convenient 4 PCS and 6 PCS multi-packs. Equipped with 7 optional factory-installed connectors (PH2.0, JST, XT30, SM, XT60, EC5, XT90) to match your flight controller or ESC without heavy plug adapters.

Key Advantages & Performance Highlights

High-Voltage LiHV Architecture (4.35V/Cell): Higher cut-off charge threshold yields increased motor RPM and prolonged flight endurance over standard 4.2V packs.
Punchy 60C Discharge Output: Delivers instant current delivery for fast altitude climbs, tight obstacle cornering, and rapid recovery maneuvers.
Ultra-Lightweight 601168 Form Factor: Minimized gram-weight maintains agile handling, low wing loading, and maximum flight duration.
7 Factory Connector Selections: Choose PH2.0, JST, XT30, SM, XT60, EC5, or XT90 for direct connection to your power harness.
Value Multi-Pack Bundles: Available in 4 PCS and 6 PCS packages to maintain continuous flying or driving rotations without waiting on recharges.
Low Internal Resistance: Premium automated stack construction minimizes thermal buildup and maximizes energy conversion efficiency.

Series Specifications & Configuration Matrix

Model / Config	Nominal Voltage	Capacity	Discharge Rate	Dimensions (L×W×H)	Approx. Weight
1S HV (1S1P)	3.8V (Max 4.35V)	380mAh	60C	62 × 11.5 × 6.7 mm	7.8g ± 1g
2S HV (2S1P)	7.6V (Max 8.70V)	380mAh	60C	68 × 12 × 13 mm	18g ± 1.5g
3S HV (3S1P)	11.4V (Max 13.05V)	380mAh	60C	68 × 12 × 20 mm	27g ± 2g

Target Applications & Broad Compatibility

Designed for agile indoor and outdoor micro platforms, including:

1S (3.8V): 65mm and 75mm tiny whoops, indoor brushed/brushless micro racers, micro indoor helicopters.
2S (7.6V): 75mm to 85mm high-power whoops, toothpick quads, micro 3D aerobatic planes, 1/24 micro RC cars.
3S (11.4V): High-RPM micro speed racers, 2-inch lightweight brushless drones, sub-micro EDF models.

Available connectors: PH2.0, JST, XT30, SM, XT60, EC5, and XT90. Select the matching connector for seamless plug-and-play operation.

Usage & Safety Guidelines

LiHV Balance Charging: Always use a dedicated LiHV balance charger set to 4.35V cut-off per cell. Never exceed 4.35V/cell.
Recommended Charge Current: Charge at 1C (0.38A) for optimal cell longevity. Never charge batteries unattended.
Discharge Threshold: Stop flying/driving before cell voltage drops below 3.3V under load to avoid unrecoverable cell damage.
Storage Protocol: Store cells at 3.85V per cell when not in use for more than 48 hours, placed inside a fireproof safety bag.
Safe Environment: Always charge on non-flammable surfaces in a clean, well-ventilated area away from combustible materials.

Why Pilots Choose DXF POWER

Since 2000, DXF has specialized in premium lithium battery engineering for competitive RC enthusiasts and drone pilots worldwide. With automated grade-A cell production, rigorous quality testing, and direct factory supply, DXF delivers rock-solid performance and exceptional value. Every pack is covered by our comprehensive 180-day manufacturer warranty and responsive technical support.