8000mAh-LONG-HV-BULLET

The DXF 2S HV 7.6V 8000mAh 140C Long Hardcase LiPo Battery with 5mm Bullet Ports delivers exceptional high-voltage power, massive capacity, and race-proven endurance for competitive 1/10 and 1/8 scale RC racing platforms. Engineered with high-density graphene chemistry in a 2S1P configuration and a standard long hardcase footprint (138 × 48 × 23 mm, approx. 323g), this high-capacity pack provides 7.6V nominal power (up to 4.35V/cell max charge) and 60.80WH of total energy. The LiHV chemistry delivers higher motor RPM, reduced voltage sag under heavy load, and explosive 140C throttle punch across full race mains and endurance sessions.

Watch DXF Batteries in Action

Key Features

• 140C high-discharge rate: Blistering acceleration, lightning-fast corner exit punch, and robust high-voltage current delivery for competitive heats
• 7.6V high-voltage (LiHV) platform: 3.80V nominal / 4.35V max charge per cell provides a distinct top-speed advantage and flatter discharge curve over standard 7.4V packs
• 8000mAh massive capacity: Extended track runtime and consistent power output for high-power brushless setups
• Long-pack hardcase format: Standard 138mm length fits easily into a broad range of 1/10 and 1/8 scale battery trays without chassis modification
• Gold-plated 5mm bullet ports: Low-resistance female bullet sockets ensure minimal electrical loss and maximum current transfer
• Graphene cell technology: Superior conductivity, reduced internal resistance, and efficient thermal dissipation under heavy competition loads
• Included 5mm bullet wiring harness: High-strand silicone power leads, selected main plug (XT60, EC5, TRX, Deans/T-Plug, XT90, XT150, or Q8S), and JST-XH balance lead
• Grade-A matched cells: Rigorously factory matched for cell voltage balance, low IR, and consistent lap-after-lap power

Specifications, Per Battery

• Brand: DXF POWER
• Series: Competition Long Hardcase Series
• Capacity: 8000mAh (60.80WH)
• Voltage: 7.6V nominal (High-Voltage 2S LiHV, 3.80V/cell nominal, 4.35V max charge per cell)
• Configuration: 2S1P
• Discharge Rate: 140C
• Form Factor: Long Hardcase Stick Pack with 5mm bullet terminals
• Dimensions: Approximately 138 × 48 × 23 mm
• Weight: Approximately 323g
• Terminal Ports: Dual 5mm gold bullet sockets + 2mm center balance socket
• Included Cable Harness: 5mm bullet connectors to chosen main plug (XT60, EC5, TRX, Deans/T-Plug, XT90, XT150, or Q8S) with JST-XH balance plug
• Applications: Spec-fit for 1/10 and 1/8 scale RC touring cars, pan cars, buggies, truggies, short course trucks, and GT racing platforms

Package Includes

• DXF 2S HV 7.6V 8000mAh 140C long hardcase LiPo battery, quantity chosen from 1–2 packs
• 5mm gold bullet to selected main connector charge/discharge wiring harness with balance lead
• User manual and safety guide

Choose Your Ideal Power Bundle

• 1 Pack – Start Strong: Single competition battery for race qualifiers, testing sessions, or dedicated single-car setups
• 2 Pack – Double Your Runtime: Swap fresh packs instantly between qualifying heats and main events without track downtime

More packs mean longer operating sessions, fewer downtime interruptions, and dependable backup capacity.

180-Day Warranty & Customer Support

Every DXF battery is backed by a 180-day manufacturer warranty against defects in materials and workmanship. DXF customer support is readily available for guidance on connector compatibility, charging parameters, and battery maintenance.

Usage & Safety Guidelines

• Use a dedicated balance charger supporting high-voltage 2S LiHV (4.35V/cell) balance charging.
• Always balance charge inside a fire-resistant LiPo safety bag and never leave charging batteries unattended.
• Do not overcharge past 4.35V per cell or discharge below 3.2V per cell.
• Store batteries at 3.80V–3.85V per cell in a cool, dry, ventilated location away from direct sunlight.
• Inspect the hardcase, 5mm bullet harness, and terminals before every race session.
• Never puncture, drop, crush, short-circuit, or expose the pack to extreme temperatures or water.
• Verify vehicle battery tray dimensions, polarity markings, and ESC voltage compatibility before operation.

Why Choose DXF?

• Advanced graphene chemistry delivering exceptional current density and flat discharge curves
• High-voltage 7.6V platform providing competitive speed and power advantages
• Rugged long hardcase format with standard dimensions for universal fitment
• Gold-plated bullet ports offering flexible, zero-adapter wiring to your electronics
• Strict quality inspection and rigorous factory testing
• Professional customer service and global warehouse logistics

Perfect For

Engineered for competitive RC racers driving 1/10 and 1/8 touring cars, pan cars, buggies, truggies, and on-road platforms requiring a high-voltage 2S HV 7.6V 8000mAh 140C long hardcase pack with 5mm bullet ports.

Dominate the track with DXF high-discharge power. Watch setups and performance tests on the DXF YouTube channel.