7500mAh-HV-MIDDLE-BULLET

The DXF 2S2P HV 7.6V 7500mAh 150C Mid-Size Hardcase LiPo Battery with 5mm Bullet Ports delivers competition-grade high-voltage power and extended runtime across multiple RC vehicle classes. Engineered with a 2S2P high-density graphene cell configuration in a versatile mid-size hardcase profile (115 × 48 × 25 mm, approx. 263g), this race-ready battery bridges the gap between compact shorties and full-size packs. Providing 7.6V nominal power (up to 4.35V/cell max charge), it generates elevated top speed, explosive 150C throttle response, and robust voltage sustain throughout grueling racing heats.

Watch DXF Batteries in Action

Key Features

• 150C extreme discharge rate: Blistering acceleration, lightning-fast throttle response, and robust current delivery for competitive heats
• 7.6V high-voltage (LiHV) platform: 3.80V nominal / 4.35V max charge per cell provides higher motor RPM and competitive punch compared to standard 7.4V packs
• 7500mAh massive capacity: 2S2P parallel cell architecture delivers extended runtime and flat voltage curves under heavy throttle loads
• Versatile Mid-Size form factor: 115mm length (115 × 48 × 25 mm, approx. 263g) offers broader chassis compatibility across 1/10, 1/8, and 1/5 scale platforms than standard short packs
• Gold-plated 5mm bullet ports: Direct-plug female bullet sockets ensure minimal resistance and maximum electrical conductivity
• Graphene cell technology: Enhanced thermal dissipation, ultra-low internal resistance, and durable cycle longevity under demanding race schedules
• Included 5mm bullet charging harness: Complete with flexible silicone power leads and selected connector (XT60, EC5, TRX, Deans/T-Plug, XT90, XT150, or Q8S) plus JST-XH balance lead
• Grade-A matched cells: Rigorously factory matched for cell voltage balance, low IR, and consistent lap-after-lap power

Specifications, Per Battery

• Brand: DXF POWER
• Series: GOLDEN-NGP PLUS Mid-Size Competition Series
• Capacity: 7500mAh (57.00WH)
• Voltage: 7.6V nominal (High-Voltage 2S2P LiHV, 3.80V/cell nominal, 4.35V max charge per cell)
• Configuration: 2S2P
• Discharge Rate: 150C
• Form Factor: Mid-Size Impact-Resistant Hardcase with 5mm bullet terminals
• Dimensions: Approximately 115 × 48 × 25 mm
• Weight: Approximately 263g
• Terminal Ports: Dual 5mm gold bullet sockets + 2mm center balance socket
• Included Cable Harness: 5mm bullet connectors to chosen main plug (XT60, EC5, TRX, Deans/T-Plug, XT90, XT150, or Q8S) with JST-XH balance plug
• Applications: Spec-fit for 1/10 touring cars & buggies, 1/8 scale buggies, truggies, GT cars, and 1/5 scale vehicles

Package Includes

• DXF 2S2P HV 7.6V 7500mAh 150C mid-size hardcase LiPo battery, quantity chosen from 1–2 packs
• 5mm gold bullet to selected main connector charge/discharge wiring harness with balance lead
• User manual and safety guide

Choose Your Ideal Power Bundle

• 1 Pack – Start Strong: Single competition battery for race qualifiers, shakedown testing, or dedicated single-car setups
• 2 Pack – Double Your Runtime: Swap fresh packs instantly between qualifying heats and main events without track downtime

More packs mean longer operating sessions, fewer downtime interruptions, and dependable backup capacity.

180-Day Warranty & Customer Support

Every DXF battery is backed by a 180-day manufacturer warranty against defects in materials and workmanship. DXF customer support is readily available for guidance on connector compatibility, charging parameters, and battery maintenance.

Usage & Safety Guidelines

• Use a dedicated balance charger supporting high-voltage 2S LiHV (4.35V/cell) balance charging.
• Always balance charge inside a fire-resistant LiPo safety bag and never leave charging batteries unattended.
• Do not overcharge past 4.35V per cell or discharge below 3.2V per cell.
• Store batteries at 3.80V–3.85V per cell in a cool, dry, ventilated location away from direct sunlight.
• Inspect the hardcase, 5mm bullet harness, and terminals before every race session.
• Never puncture, drop, crush, short-circuit, or expose the pack to extreme temperatures or water.
• Verify vehicle battery tray dimensions, polarity markings, and ESC voltage compatibility before operation.

Why Choose DXF?

• Advanced graphene chemistry delivering exceptional current density and flat discharge curves
• High-voltage 7.6V platform providing competitive speed and power advantages
• Versatile 115mm mid-size form factor providing broad compatibility across multiple chassis sizes
• Gold-plated bullet ports offering flexible, zero-adapter wiring to your electronics
• Strict quality inspection and rigorous factory testing
• Professional customer service and global warehouse logistics

Perfect For

Engineered for competitive RC racers and hobbyists driving 1/10, 1/8, and 1/5 scale touring cars, buggies, truggies, and GT racing platforms requiring a versatile mid-size 2S2P HV 7.6V 150C hardcase pack.

Dominate the track with DXF high-discharge power. Watch setups and performance tests on the DXF YouTube channel.