7200mAh-HV-ULCG-BULLET

The DXF 2S HV 7.6V 7200mAh 140C ULCG (Ultra Low Center of Gravity) Hardcase LiPo Battery with 5mm Bullet Ports delivers competition-grade high-voltage power with an ultra-slim 18.5mm profile designed for high-speed RC touring and pan cars. Engineered with premium graphene chemistry in a 2S1P cell configuration and an ultra-low-profile hardcase (138 × 48 × 18.5 mm, approx. 245g), this high-capacity battery provides 7.6V nominal power (up to 4.35V/cell max charge). By dramatically lowering chassis roll center and total weight, it enhances cornering agility and straightaway stability, while delivering explosive 140C throttle response throughout intense racing heats.

Watch DXF Batteries in Action

Key Features

• 140C extreme discharge rate: Instant throttle punch, rapid corner exit acceleration, and robust high-voltage current delivery for competitive heats
• 7.6V high-voltage (LiHV) platform: 3.80V nominal / 4.35V max charge per cell provides higher motor RPM and competitive speed compared to standard 7.4V packs
• 7200mAh high capacity: Maximum extended racing runtime and flat voltage curves under full throttle loads
• Ultra-Low Center of Gravity (ULCG): Ultra-slim 18.5mm height (138 × 48 × 18.5 mm, approx. 245g) lowers chassis center of gravity for maximum cornering traction and reduced chassis roll
• Gold-plated 5mm bullet ports: Direct female bullet sockets ensure minimal resistance and maximum electrical conductivity
• Graphene cell technology: Enhanced thermal dissipation, ultra-low internal resistance, and durable cycle longevity under demanding race schedules
• Included 5mm bullet charging harness: Complete with flexible silicone power leads, selected main connector (XT60, EC5, TRX, Deans/T-Plug, XT90, XT150, or Q8S), and JST-XH balance lead
• Grade-A matched cells: Rigorously factory matched for cell voltage balance, low IR, and consistent lap-after-lap power

Specifications, Per Battery

• Brand: DXF POWER
• Series: Competition ULCG Series
• Capacity: 7200mAh (54.72WH)
• Voltage: 7.6V nominal (High-Voltage 2S LiHV, 3.80V/cell nominal, 4.35V max charge per cell)
• Configuration: 2S1P
• Discharge Rate: 140C
• Form Factor: ULCG Ultra-Low Center of Gravity Hardcase with 5mm bullet terminals
• Dimensions: Approximately 138 × 48 × 18.5 mm
• Weight: Approximately 245g
• Terminal Ports: Dual 5mm gold bullet sockets + 2mm center balance socket
• Included Cable Harness: 5mm bullet connectors to chosen main plug (XT60, EC5, TRX, Deans/T-Plug, XT90, XT150, or Q8S) with JST-XH balance plug
• Applications: Spec-fit for 1/10 touring cars, pan cars, drift cars, formula chassis, and 1/8 on-road GT platforms

Package Includes

• DXF 2S HV 7.6V 7200mAh 140C ULCG hardcase LiPo battery, quantity chosen from 1–2 packs
• 5mm gold bullet to selected main connector charge/discharge wiring harness with balance lead
• User manual and safety guide

Choose Your Ideal Power Bundle

• 1 Pack – Start Strong: Single competition battery for race qualifiers, shakedown testing, or dedicated single-car setups
• 2 Pack – Double Your Runtime: Swap fresh packs instantly between qualifying heats and main events without track downtime

More packs mean longer operating sessions, fewer downtime interruptions, and dependable backup capacity.

180-Day Warranty & Customer Support

Every DXF battery is backed by a 180-day manufacturer warranty against defects in materials and workmanship. DXF customer support is readily available for guidance on connector compatibility, charging parameters, and battery maintenance.

Usage & Safety Guidelines

• Use a dedicated balance charger supporting high-voltage 2S LiHV (4.35V/cell) balance charging.
• Always balance charge inside a fire-resistant LiPo safety bag and never leave charging batteries unattended.
• Do not overcharge past 4.35V per cell or discharge below 3.2V per cell.
• Store batteries at 3.80V–3.85V per cell in a cool, dry, ventilated location away from direct sunlight.
• Inspect the hardcase, 5mm bullet harness, and terminals before every race session.
• Never puncture, drop, crush, short-circuit, or expose the pack to extreme temperatures or water.
• Verify vehicle battery tray dimensions, polarity markings, and ESC voltage compatibility before operation.

Why Choose DXF?

• Advanced graphene chemistry delivering exceptional current density and flat discharge curves
• High-voltage 7.6V platform providing competitive speed and power advantages
• Ultra-slim 18.5mm ULCG profile lowering center of gravity for maximum handling speed
• Gold-plated bullet ports offering flexible, zero-adapter wiring to your electronics
• Strict quality inspection and rigorous factory testing
• Professional customer service and global warehouse logistics

Perfect For

Engineered for competitive RC racers driving 1/10 touring cars, pan cars, buggies, and on-road platforms requiring a high-voltage 2S HV 7.6V 7200mAh 140C ultra-low center of gravity (ULCG) hardcase pack.

Dominate the track with DXF high-discharge power. Watch setups and performance tests on the DXF YouTube channel.