SOFT-HV-9400MAH-140C

The DXF SOFT-HV-9400MAH-140C series is built for extreme power demands, offering massive 9400mAh capacity paired with an aggressive 140C discharge rating. Available in 6S 22.8V and 12S 45.6V high-voltage (LiHV / Graphene) configurations with heavy-duty 10AWG ultra-flexible silicone wire, this soft case lineup delivers relentless throttle response, minimal voltage sag, and outstanding runtimes for 1/8 & 1/10 scale RC buggies, trucks, high-speed powerboats, and heavy-lift UAV platforms.

Key Features:

• Extreme 140C Discharge Output: Engineered to deliver massive instantaneous burst power and razor-sharp throttle punch without thermal bottlenecking.
• High-Voltage (LiHV / Graphene) Platform: Higher nominal cell voltage (3.8V nominal, 4.35V max charge per cell) produces higher top-end RPM, flatter discharge curves, and elevated total watt-hour efficiency.
• Heavy-Duty 10AWG Silicone Leads: High-strand count, ultra-flexible 10AWG wiring minimizes internal resistance and easily handles sustained high-amperage draw.
• Versatile Connector Selections: Available with standard factory plugs including XT60, EC5, TRX, Deans/T-Plug, XT90, XT150, XT90S Anti-Spark, and QS8 to integrate seamlessly into your ESC setup.
• A+ Grade Matched Lithium Cells: Precision cell sorting ensures uniform internal resistance and consistent cell balancing across demanding high-load cycles.
• Lightweight Soft Case Form Factor: Streamlined protective soft case design maximizes capacity while shedding dead weight for performance-critical builds.

Specifications:

• Battery Chemistry: Premium High-Voltage Lithium Polymer (LiHV / Graphene)
• Series: DXF High-Discharge Soft Case Series
• Capacity: 9400mAh
• Discharge Rate: 140C (280C Burst)
• Voltage Configurations: 6S 22.8V (214.32Wh) / 12S 45.6V (428.64Wh)
• Nominal Cell Voltage: 3.8V per cell
• Max Charge Voltage: 4.35V per cell
• Discharge Cut-off Voltage: 3.3V per cell
• Wire Gauge: Heavy-duty 10AWG ultra-flexible silicone wire
• Balance Connector: Standard JST-XH
• Main Plug Options: XT60 / EC5 / TRX / Deans T-Plug / XT90 / XT150 / XT90S / QS8

Package Includes:

• 1x (or selected multi-pack bundle) DXF 9400mAh 140C High-Voltage Soft Case Battery
• 1x Non-slip Battery Mounting Strap (per battery)
• 1x User Manual & Safety Warning Guide
• 1x Protective DXF Packaging Box

Power Bundle Options:

• 1 Pack: Single high-capacity pack ideal for standalone system evaluation, replacement, or single-pack RC setups.
• 2 Pack Combo: Pilot & driver favorite allowing uninterrupted running by swapping packs between runs.
• Multi-Pack (3–6 Pack): Extended power reserves designed for competitive track events, flight teams, and commercial multirotor operations.

180-Day Manufacturer Warranty:

DXF provides a 180-day limited warranty covering manufacturing workmanship, internal assembly, and factory cell integrity. Please inspect and verify individual cell voltages upon initial arrival prior to cycling.

Usage & Safety Guidelines:

• Charge exclusively with a professional microprocessor balance charger supporting LiHV chemistry (4.35V per cell max).
• Always balance charge inside a fire-retardant LiPo safe pouch on a fireproof surface; never leave charging batteries unattended.
• Do not over-discharge below 3.3V per cell, and avoid puncturing, crushing, or exposing the soft pack to extreme heat.
• Store batteries at 3.80V–3.85V per cell storage voltage in a cool, dry, well-ventilated location.

Why Choose DXF:

DXF POWER designs competition-grade lithium power solutions engineered for demanding RC drivers and UAV pilots, combining strict cell sorting, heavy-gauge low-loss silicone wiring, and dependable high-current power delivery.

Perfect For:

• 1/8 & 1/10 scale high-speed RC buggies, truggies, monster trucks, and short course trucks.
• High-speed RC racing hydroplanes, mono hulls, and catamaran powerboats.
• Commercial UAVs, agricultural multicopters, aerial cinema rigs, and heavy-lift drone platforms.